Rev C+ Hammerhead
Our Rev C+ is the ‘Bare-Bones’ work horse of the Juergensen line, perfect for a secondary O2 monitoring unit, yet strong enough for use as your primary.
Dimensions: 4.3” x 3.1” x 1.8” deep
Display: 0.7” x 2.5” Viewable. (2 Line)
Rev C+ Hammerhead Primary Configuration
Featuring JMI’s revolutionary Integrated Decompression program, user definable Gradient Factors, Selectable Solenoid Modes allowing you to dial-in just the right settings for your rebreather. Also including a proprietary algorithm for controlling the bolus of O2 delivered to your system, the Hammerhead Primary Controller is without parallel in the diving world.
Key Features
- User Definable Set Points
- User Definable Gradient Factors
- 10 User Definable Gas Mixes
- User definable Solenoid Firing
- User definable backlight illumination
- User definable auto-shut down
- Built-in Barometer
- Built-in Temperature display
- Full Trimix Decompression Computer
- Built in Battery Monitor
- Runs on a standard AA Battery
- (Minimum)6 hours of battery life*
- Automatic Transmission, automatic Set-Point change-over
- Wrist Strap or Clip mounting options
*One fresh 1.5v AA Alkaline Batter will give a minimum 6 hours of dive time, while firing Solenoid.
The Rev C+ was designed to accept the following AA battery options:
- 1.5v AA Alkaline
- 1.5v AA Lithium
- 3.6 v AA Lithium (Min. 300mA drain)
- Two 3.6V ½ AA Lithium Stacked
This allows the HH Rev C+ to be powered by just about any AA on the market.
Rev C+ Hammerhead Secondary Configuration
The Rev C+ Hammerhead Secondary Display is no less revolutionary than the Primary counterpart. The fundamental idea behind the Secondary Display is to provide the diver with a completely redundant and independently powered ppO2 monitor for added security.
Key Features
- Built in DECO Computer
- Integrated Depth/Timer
- Integrated Barometer
- Temperature Display
- Integrated Stack Timer
- Alarms for end of Stack Life
- Two Heads Up Display Modes
- User Definable Set-Points for Average Display
- Wrist Strap or Clip mounting options
- Battery and Housing features of the Primary
For more information about what goes into every design, visit Juergensen Intelligent Designs

